How to replace a washing machine door lock on a Bosch Neff and Siemens.
by Paul Charmbury
/
Friday, 23 August 2013
/
Published in Door Locks & Switches, Repair Guides, Washing machines
How to replace a washing machine door lock on a Bosch Neff and Siemens
This video will show you how to replace a washing machine door lock (called an interlock); we will show you a step by step procedure on the process.This video can be used on Balay, Bosch, Neff and Siemens.
To find your door lock for your Washing Machine you will need the full model number and on some models we will even need the serial number as the manufactures sometimes have fitted more than one type to a model series.
-
Bosch washing machine will not spin
-
How to replace washing machine drum bearings on Bosch, Neff, Siemens or Balay.
-
How to replace washing machine carbon brushes Bosch Balay Neff Siemens
-
How to replace a washing machine motor on a Bosch, Neff, Siemens or Balay
-
How to change and replace a washing machine pump on Bosch, Neff and Siemens.
-
How to fit the new element and thermostat to this Bosch, Neff or Siemens washing machine.
-
How to replace a washing machine door seal or gasket on a Balay, Bosch, Neff or Siemens.
Tagged under:
how to change a washing machine door lock, how to fit a washing machine door lock, How to replace a washing machine door lock
How do I fit a new hinge on washing machine….????
The make is a siemensxlm 1200. Thankyou
I need to fit a Bosch washing machine interlock, but your tutorials do not show the one I have, LogiXX 8 – model WAS28461GB/07.
It doesn’t have 2 screws on the front to remove it, just 2 plastic pins which I cant seem to remove. I have removed the rubber seal around the door entrance but cannot see a way of removing the old door interlock.
Any ideas would be very helpful
Martin, Did you discover how to do this as I have the same problem. Would be grateful if you could let me know the secret. Bernard.
Thank you so much for putting this video on line. We have a 7 year old bosch where the door catch has gone and you have just saved us £95 call out. Cant wait for our part to come.
Hi, Found out how to do it by trial and error. Simply use a small screwdriver to push in the buttons and wiggle the interlock around and it will simply come out! Eventually! Best of luck. Fitting new one simple. Bernard.
Thanks.
glad we could help you
Appliances Engineer
Will interlock stay on machine if locating pins are broken off, no screws on bosch.max6wab type
Hi , I am looking for an interlock for Whirlpool 24 inches 120v 60hz Type 114-2 WFW5090GW serial No: CF72507304 washing machine.