Indesit dishwasher error codes and faults Diagnostic fault finding
When your dishwasher doesn't work you normally get an error code, you may just think it has flashing lights but on most machines they mean something, these are called error codes and are designed in a way to help an engineer or you find the fault with the dishwasher. this article is on Indesit which is made by the Merloni but as they make brands like Ariston, Creda, Hotpoint etc the fault codes may be similar. we have added a load of videos at the bottom to help you with your repairs when you work out the problem that you may have . please remember to support our site by shopping for your spare parts with us.
102 Responses to “Indesit dishwasher error codes and faults Diagnostic fault finding”
Hi
I have a problem with a Indesit DIS16 where the bump is not spaying water. The drain pump and heating element are working. There is no alarm nor error code.
I opened the machine, checked hoses, put the machine on its back and checked the impeller (moved it manually) in the main pump. There was nothing.
Thus, there were not things jammed inside apparently.
Put all together and the machine stated to work again.
What do you think it is the problem? if it happens again, what’s the culprit?
Thanks
Chris
Hi there, My Indesit IDL 75 Stopped working – The on/off Button light when pushed comes on but as soon as I take my finger off it doesn’t remain on. Only if while pressing the on/off I press the Reset after a few seconds I might hear water enter and it will pump water out etc.
I do get an error code 2 – Which I’ve checked. which says it could be the solenoid ( It’s a double solenoid) I have checked it with mains and it seems to be working – but maybe there could be a check-back that holds the other solenoid’s in?? – I’ve also checked the jug assembly and it all looks good, – Wondering if you might have any idea what could be the problem ( This machine although oldish 2007?) is in immaculate condition – underneath all looks good!
I would appreciate of your opinion?
My slimline integrated dishwasher lights 1 and 3 come on and the dishwasher will not work on any program?
My indesit dishwasher idf 125 starts then stops with the 1st and 3ed lights flashing
I currently have this issue but am unable to ascertain the correct fault. I have the round green LED’s and not the updated (i think) red LED’s. Any help would be appreciated.
upload a video please and I will look into it
Ihave this exact problem. Indesit DIF04B1 on/off button flashes green, LED’S 1 AND 3 LIT
If you have a question about a fault on an appliance please use the contact form instead.
My indesit prime idp 148 wont turn on. Have checked the fuse in the plug and also tested the socket but it remains dead. Any idead
i have a problem with flasing on display eror a3
Hi there I have an Indesit Idl 530 dishwasher with a F10 error code (lights 2&4 flashing) according to a lot of sources it’s related to heating element, today I replaced the heating element with another genuine element and I even replaced the thermostat st the same time with a genuine one again (whilst the bottom was open and could also of been a process of elimination I thought I’d also change that!)
Machine still throws up error 10 at same point when the spray arm rotates and signals the element to heat, any ideas anybody? No other faults at all, just that!
Thanks in advance
Daz
my dishwasher in not filling up with water it has one green flashing light and the third and fourth lights are yellow
Hi, I have a dfp58t94 dishwasher with f15 error but with more frequency in other program than 3…
It’s possible for few euro to have the service manual?
Thanks.
Best regards.
please use the contact us form as there were a few different models
859990845290 DFP 58T94 A EU
859990845910 DFP 58T94 CA NX EU
859990892490 DFP 58T94 A UK
859991052280 DFP 58T94 Z
859991531930 DFP 58T94 Z NX
859991574830 DFP 58T94 CA NX EU
Hi
We have an Indesit dishwasher DIF 04b1. The board lights up then turns itself off and turns itself on again and keeps doing this. If we put the door shut it sometimes comes on and lasts for about 5 minutes and then turns itself off again. Then it just keeps beeping on and off. it never settles on any fault light sequence. Is this an easy fault to correct or not?
Thanks
If you have a question about a fault on an appliance please use the contact form instead. Questions on faults in the comments will not be answered.
have a indesit dishwasher powersup after 5 mins end light stays on and salt refile light keeps flashing even low its full dosent start have to turn of from mains
If you have a question about a fault on an appliance please use the contact form instead
Hi,
Our indesit dishwasher DIFP18B1 defaults to a flashing 5 no matter what program is selected
It’s only 4 years old and we’ve already replaced the pump twice
Any ideas?
To have any question answered you must use the contact us page
Hello , I have an Indesit DIF04B1it starts up , the pump drains and it sounds like its filling then 5-10 mins in I check it and the !st and 3rd lights are lit up and the machine is no longer working. Any idea what this may be.
Kind regards
Luigi Lipparelli
To have any question answered you must use the contact us page
I have the same problem. Please help
Hi, re DVG 622 dishwasher: the machine empties, then I can hear it filling – then it stops with error F02 indicated and some water present in the base of the dishwsher
We have an Indesit dishwasher DIF 04b1.
I wasn’t cleaning dishes, just filling with water and not pushing water to the spinning arms so I’ve just replaced the pump.
It switched on and sounded like it was doing something but when I opened I’d put it on eco so was going to take forever so I switched it off and now it’s making a horrible noise and the on/off LED is flashing, if I switch it off, it just switches itself back on and makes a horrible noise again… the only way to stop The noise it to switch it off at the plug!
Any thoughts? Help!
Hello Paul
I have indesit DIS 04 and is not working. After a short while of starting it when I open the door, light 1 and 3 flashes in quick succession alongside power button. Can you please help with what could be an issue?
Many thanks
Dif04b1 dishwasher runs then stops and 4 led lights flash and beep then starts up again .then again stops lights flash and beep .
Indesit DISR14B1 UK
All lights flashing and bleeping. What is the problem?
Have switched off and on again but keeps repeating
Er, DIF04 – seeing an error with LEDs 1 and 3 flashing (and power), led positions as per second last diagram.
That equates to an F05, which doesn’t exist!
Any ideas?
My Indesit dfg262 dishwasher malfunctions. Fault code:
Led 1: On
Led 2: Off
Led 3: On
Led 4: Off
What could the problem be?