Collection: Washer & Dryer Parts

This genuine Whirlpool door interlock (part number 481010602648) is an electronic safety device that locks the washing machine door during the wash cycle and provides a time delay before it can be opened after the cycle ends. If the door no longer locks, the machine will not start. Specification: Rold DK Series DKS66 (93819). Compatible with selected Bauknecht, KitchenAid, Maytag, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part number: C00375005.

This genuine Whirlpool drain pump assembly (part number 481010581330) is responsible for removing water from the drum during and after the wash cycle. A faulty or blocked pump can cause water to remain in the drum, trigger error codes, or prevent the machine from completing a cycle. Compatible with selected Bauknecht and Whirlpool washing machines — always check the model fit list before ordering. Specification: Askoll M277. Alternative part number: C00374788.

This genuine Whirlpool pump filter (part number 481010585335) is fitted at the base of your washing machine to catch lint, coins, and other debris before they reach the pump. A blocked or damaged pump filter can cause poor drainage, error codes, or water remaining in the drum after a cycle. Regular cleaning of the filter is recommended to keep your machine running efficiently. Compatible with selected Bauknecht, Ignis, KitchenAid, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part number: C00505085.

This genuine Whirlpool NTC temperature sensor (part number 481228219485) connects to the heater element inside your washing machine to monitor water temperature throughout the wash cycle. If the sensor is faulty or damaged, the machine may not heat water to the correct temperature, resulting in poorly washed clothes or a cycle that fails to complete. Compatible with selected Ariston, Bauknecht, Hotpoint, Hotpoint-Ariston, Ignis, Indesit, KitchenAid, Laden, Maytag, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part numbers: 481228218702, C00313117.

This genuine Whirlpool suspension spring (part number 481010816226) supports the drum inside your washing machine, working alongside the suspension legs to keep the drum balanced and centred during wash and spin cycles. A worn or broken suspension spring can cause the drum to move excessively, leading to loud banging, vibration, and potential damage to other components. Compatible with selected Bauknecht, KitchenAid, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part number: C00447715.

This genuine Whirlpool suspension leg (part number 481010754041) connects the outer tub to the base frame inside your washing machine, absorbing the shocks generated during agitation and spin cycles to keep the drum balanced and stable. Over time, suspension legs can stretch or become damaged under constant tension, causing excessive vibration, loud banging noises, and potential internal damage or leaks. Replace this part if your machine vibrates heavily or makes unusual noise during a cycle. Compatible with selected Bauknecht, KitchenAid, Maytag, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part number: C00375034.

A split or worn door seal is one of the most common causes of a leaking washing machine. This genuine Whirlpool door seal (part number 481010632437) creates a watertight barrier between the drum and the door, preventing water from escaping onto the floor during a wash cycle. Replace the seal if you notice leaking from the front of the door, visible tears or warping in the rubber, or mould build-up that cannot be cleaned away. Compatible with selected Bauknecht, KitchenAid, and Whirlpool washing machines — always verify the model fit list before ordering. Alternative part number: C00443984.

This genuine Whirlpool dispenser drawer (part number 481010701063) is the correct replacement when the detergent drawer on your washing machine is cracked, broken, or no longer slides smoothly. Fitting this original spare part restores the proper dispensing of detergent, fabric conditioner, and pre-wash additives during each cycle. Compatible with selected Bauknecht, KitchenAid, and Whirlpool washing machines — always check the model fit list before ordering. Alternative part number: C00445436.

This genuine Whirlpool dispenser (part number 481010701068) is the correct replacement when the detergent dispenser drawer or housing on your washing machine is broken, cracked, or not releasing detergent properly. Installing this original spare part ensures your machine dispenses detergent, fabric conditioner, and pre-wash products at the right cycle stage. Compatible with selected Bauknecht, KitchenAid, and Whirlpool washing machines — please verify the model fit list before ordering. Alternative part number: C00445437.

This genuine Whirlpool hose bend (part number 481253049392) is the ideal replacement when the existing hose bend on your washing machine becomes cracked, blocked, or damaged. Fitting this original spare part restores the correct water flow between the dispenser and drum, helping your appliance run reliably again. Compatible with a wide range of Bauknecht, Hotpoint, Ignis, KitchenAid, Laden, Maytag, and Whirlpool washing machines. Always check the model fit list before ordering. Alternative part numbers: C00313076.

This genuine Whirlpool pump filter (part number 481010585335, also known as C00505085) is a direct replacement for the original part. The pump filter traps debris and lint from the wash water before it reaches the drain pump, protecting the pump from blockages and damage. Replacing a clogged or damaged filter restores proper drainage and prevents pump failure. Please check the model fit list to ensure this part is correct for your appliance.

This genuine Whirlpool NTC temperature sensor (part number 481228219485) monitors water temperature during wash cycles, ensuring your machine heats correctly. The sensor connects to the heater element and signals the control board to maintain the right temperature. A faulty or damaged sensor can cause poor washing results, incomplete cycles, or error codes. Alternative part numbers: 481228218702, C00313117. Please check the model fit list to confirm compatibility with your appliance.

This genuine Whirlpool suspension spring (part number 481010816226) is a direct replacement for washing machines that have developed excessive drum vibration or noise. Suspension springs support the outer drum and absorb movement during wash and spin cycles. A worn or broken spring causes the drum to move unevenly, leading to loud banging and potential damage to internal components. This part also carries alternative part number C00447715. Please check the model fit list to confirm compatibility with your appliance.

This genuine replacement shock absorber suspension leg is designed to keep your washing machine drum balanced during agitation and spin cycles. Suspension legs connect the outer tub to the base frame, absorbing vibrations and preventing the drum from rattling excessively. Over time, the dampers can stretch or become damaged from the constant tension of washing cycles. When the shock absorber fails, the machine will vibrate heavily and produce excessive noise due to an unbalanced drum. Worn or damaged suspension components can also lead to internal damage and leaks, making timely replacement essential for maintaining your appliance. Please check the model fit list to confirm compatibility with your machine. Manufacturers Part Number: 481010754041 Alternative Part Numbers: C00375034 EAN: 8015250438116

Keep your washing machine running efficiently with this genuine replacement sump hose. The sump hose connects the drum to the pump, and a split or damaged hose will cause water to leak onto your kitchen floor. Washing machine hoses typically fail at the metal coupling where the hose end is crimped — over time, water flow sharpens the metal edges and can cut through the hose, causing a rupture. Replacing a faulty hose promptly prevents water damage to your appliance and its surroundings. Please check the model fit list to ensure this part is correct for your appliance. Manufacturers Part Number: 00494562 | Alternative Part Numbers: 494562 | EAN: 7439647937906

This is a genuine part salvaged from an appliance. While the part is fully functional and structurally sound, please note that there may be cosmetic stain marks. Choosing a salvaged part is an environmentally friendly and cost-effective way to restore your appliance to full working order. Restore the watertight integrity and clean appearance of your appliance with this genuine Bosch Neff Siemens Washing Machine Door Seal Boot Gasket. This crucial rubber seal, also known as the bellows, forms the airtight barrier between the outer drum and the door opening, preventing water from escaping during the wash cycle. If your machine is leaking water from the front, or if the original rubber seal is cracked, perished, or has mould buildup that cannot be cleaned, replacing it is essential for safe and efficient operation. Please check the model fit list carefully to ensure this seal is the correct size and profile for your specific Bosch, Neff, Siemens, Balay, or Constructa washing machine model. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 11048742 Alternative Part Numbers: 00362172