Zanussi ZDC 37200W Tumble Dryer Not heating clothes and pause/start light flashing red
Customer Question
Seems to work for a while and then starts beeping and the start/pause light flashes red. If I open the door the clothes do not seem very warm.
I will try and help with this problem on your Zanussi ZDC 37200W Tumble Dryer
Good afternoon Rob
There are many things that can cause this type of problem- I will try and go through them in the order of the most common.
- Check the thermostats there are normally 3 altogether - two on the heater and one on the front venting system.
- Next test the heating element - there is a high and low circuit and you need to test both sides of this heater.
- As this condenser tumble dryer has a water dispenser system sometimes you have a pump fitted that can get clogged, also sometimes there is a switch system that tells the computer when it is full of water and therefore this will cut out the heating system.
- The next one that may be at fault is the printed circuit board. I have included some videos below to help you in all these repairs and if you do need a part please let me know.
Parts for This Model
Showing compatible parts for model ZDC 37200W
Finding compatible parts…