Panda PAN60SF Portable Tumble Dryer Overheated While Drying & Won't Turn Back On
I have a Panda PAN60SF Portable Tumble Dryer. It started last night on 9/15/2026 while I was drying a chenille blanket. The lint from the blanket overheated the dryer and the dryer stopped working. I've been able to remove the back panel of my dryer but it doesn't quite look like the model in your videos. I asked AI what to do and it said to clean the lint filter and then remove the back panel and press the tiny red reset button. When I look in my machine I see a small motherboard on the left side of the machine. The tiny red reset button is located on that motherboard. I pressed it. Replaced the panel. Plugged the dryer in and it didn't start. AI says I need to replace the thermal fuse which I was told was a small white ceramic block inside a red sleeve right next to the tiny red reset button. There are 2 wires coming out of the tiny white block. Now my confusion comes when I look at the videos and it shows a cylindrical fuse located somewhere else entirely and now I'm not sure what part to buy and fix. If you could kindly please shed some light on how to fix this and the proper part to order I'd greatly appreciate any help you can offer.
Tools Required
Hi Lori, if your Panda PAN60SF portable tumble dryer has overheated and won't turn back on, the issue is likely related to a thermal fuse or internal protection mechanism that has been triggered.
Start by locating the inline fuses. There may be one or two fuses depending on your model. Use a multimeter to test them:
- Set your multimeter to the continuity or resistance setting
- Touch the probes to each end of the fuse
- A working fuse will show continuity; a blown fuse will show no reading
- Replace any blown fuses with the exact same type
(If you don't have a multimeter, you can get one by our Multimeter Amazon Affiliate Link)
Thermal Fuses and Safety
Thermal fuses are critical safety components designed to prevent fires by cutting power if the dryer overheats. They must always be replaced with the correct type. Using an incorrect replacement fuse can compromise safety and void your warranty.
Next Steps
Once you've identified the fault—whether it's a blown fuse, thermal fuse, or another component—contact an authorised dealer or the main Panda distributor. Since this is not a UK-manufactured machine, they will have access to genuine replacement parts and can provide specific guidance for your model.
Do not attempt to bypass or temporarily repair thermal fuses, as this removes an essential fire-safety feature.
Parts for This Model
Showing compatible parts for model PAN60SF