indesit Oven cucina FID20WH fan not working
hi can i replace the fan without getting the back of the oven
I will try and help with Indesit Oven FID20WH problem
No, you will have to pull the oven out of its housing and then remove the back panel make sure the appliance is disconnected from the electricity Supply, do remember that the nuts on the fan blade turn the opposite way I have included a video below to assist you and you can find all the parts for this Appliance in the list on the diagram below
All the parts for your cooker/oven are in the exploded diagram below, just match it up to the part number in the list below that, And I've included a selection of videos for your oven
For your future reference I’ve included some Common faults with these Indesit FID20WH Oven to assist you in the future or anyone else reading this.
-
The oven will not turn on
The first thing you need to check is that the oven timer is not on auto if it is turn it on to manual. -
No Heat in Oven
If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed. -
Electricity trips (Rcd) when I turn the oven on or grill
This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault. -
The grill element doesn't work
This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature. -
The oven fan is not working or spinning correctly (slow) or is noisy
The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems. -
The oven overheats and burns everything
Normally this is a simple thermostat failure which would manifest itself as this symptom. -
The oven or cooker cuts out after it's been on for a while
This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Parts for This Model
Showing compatible parts for model fid20wh