Hoover HLE C10DRGR-80 Condenser Tumble Dryer Will Not Power On
I have a Hoover HLE C10DRGR-80 Condenser Tumble Dryer. I removed the PCB and tested various components with my DVM, I found the 1000uH Axial Leaded Inductor (for LNK) open circuit, also found LNK3206D source pins 1,2 showing continuity with pins FB and BP 3,4 connected together. So it seems both the Inductor and LNK need replacing. Would you be able to repair this board or alternatively provide the parts (I will have to find a local PCB repairer). I am not an electronics expert, only worked closely with them so only know roughly what I'm doing. Thanks. I can send photos if required.
Tools Required
Thank you for your question regarding the Hoover HLE C10DRGR-80 Condenser Tumble Dryer. I'm not an expert in circuit board repairs. I have replaced parts such as switches, capacitors, diodes and resistors on my own machines, but I cannot offer this service to customers because I focus on repair videos.
Your best option may be to find a replacement board. Try searching eBay, Facebook Marketplace and our website using the full model number. Sometimes machines are scrapped because of a failed drum or motor, but the circuit board is still fine.
You may find a cheap tumble dryer that is not heating. This could give you the board you need, plus other useful spare parts.
Use the save search option on eBay or Facebook Marketplace. You will then receive alerts when parts for your model are listed.
It is worth keeping your dryer running, as heat pump dryers are replacing vented and condenser models. I also have exploded diagrams for your machine if needed.
Good luck with the repair. It is great that you are checking which parts may have failed on the circuit board.
Service Documents
Parts for This Model
Showing compatible parts for model HLE C10DRGR-80