Hoover DX C9TCG-80 Tumble Dryer Dynamic Next 9kg E21 Fault showing on display

I will try and help with this problem Hoover DX C9TCG-80 tumble dryer Dynamic Next 9kg 

 

The manufacturer's normally States this is a fault with the heating system, the first thing I would check is the heater itself and the thermostats on the top of the heater the manufacturer only sells this as a complete unit but we have managed to find the 206 cut out thermostat, which i have put below at bottom of page,

I have also added an exploded diagram to assist you in finding any parts that you need for this tumble dryer in the future. below that, you will find the full list of the parts just click on the link and it will take you through to the correct part for your machine if it's available, I have also included some very good videos to assist you and you of the past, it is also worth watching the one about the tumble dryer relay as this has now become a common issue E21 Notes Heater control relay on the “cuore” electric module is not working. High temperature has been reached – Thermo Fuse worked. Check the thermo Fuse, and the wiring. Check that both the ventilation circuit and ventilation ducts are clean and duct is not obstructed. Replace the “cuore” electric module only in the case that the heater command relay is faulty   have a good xmas

 

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

Hoover DX C9TCG-80 Tumble dryer Dynamic Next 9kg spare parts