Electrolux EW8W2123RA Washer Dryer Trips the Electric

Hi Steve,

Sorry to hear about the problem with your Electrolux EW8W2123RA Washer Dryer,

Electrical faults can feel like a long, patient hunt, though the culprit is sometimes surprisingly simple. With some electrical knowledge and the technical information supplied for your washer dryer, you can work through the machine methodically.

The most likely suspects are the motors or heating system. As this appliance has several of each, isolate them one at a time. Start by unplugging the main motor connections, ensuring all loose wiring is safely secured and cannot touch the chassis or other components. Then switch the machine on. If it no longer trips, the main motor is a strong suspect.

Repeat this process with each component, disconnecting it completely before testing. Any removed wire should be sleeved or insulated to prevent a short circuit.

The most reliable tool for this job is a megger, or insulation tester, which can reveal earth faults and direct shorts far more clearly.

If you need to buy a megger, you can use our Megger Amazon Affiliate Link to get one.

There was no telephone number in your post, so I could not call to explain. Please check your email for my contact details, and feel free to get in touch if you need further help. I have also included videos and PDFs that may guide you through the repair.

Good luck with it.