Beko WY85242W Washing Machine Drain Pump Impeller Come Loose

Hi David, 

Thank you for getting in touch about your Beko WY85242W washing machine drain pump.

A loose impeller is typically caused by impact damage—often from a coin or small object striking it during the wash cycle. While it might seem like a repair candidate, the most practical and cost-effective solution is to replace the pump entirely rather than attempt to glue or reattach the impeller. Adhesive repairs rarely hold under the pump's operating conditions and tend to fail prematurely.

The good news is that drain pumps are affordable components and straightforward to replace. Most owners can complete the job with basic tools and a little patience. You can find the related spare parts below.

Beko Washing Machine Drain Pump Assembly 2840940200 (Alternative)

Beko Washing Machine Drain Pump Assembly 2840940200 (Second Hand)

Here is a full description of what to do:

• Drain the Machine: Always unplug the machine from the electricity supply first. Open the filter flap at the bottom right of the machine. Use the small pull-out drain hose to empty the water into a shallow tray. (If your machine is completely full, you may need to empty the tray multiple times before unscrewing the main filter).

• Access the Pump: You can either remove the front panel for maximum visibility or, more simply, carefully lean the machine backwards against a wall to access the pump from underneath the cabinet.

• Remove the Motor: Disconnect the electrical wiring plug from the pump. You don't necessarily have to remove all the thick rubber hoses if your filter housing is intact. Look at the back of the pump motor—there is a locking tab. Press this tab down and twist the motor block anti-clockwise. The old motor will unlock and separate from the plastic filter housing.

• Install the New Part: Take your new pump motor, line up the locking tabs, and firmly twist it clockwise into the existing housing until it clicks into place. Reconnect the wiring plug, ensure your filter is screwed in tightly, and you're ready to test it.

Below you'll find technical diagrams, specifications, and step-by-step guidance to help you through the process. We've also included some video tutorials so you can see exactly how it's done before you start.

If you're unable to locate the correct pump for your model or have questions during installation, please don't hesitate to contact us. We're here to help you get your washing machine back in working order.

⚠️ Crucial Tip: Watch the Video First! I cannot stress enough how important it is to watch the video fully before you begin. The video will give you a complete visual walkthrough of exactly how to drain the machine without making a mess, where the hidden locking tabs are located on the pump, and the exact twisting motion required to release the motor block. Seeing it done first makes the physical repair significantly easier.