Beko WM62125W Washing Machine Fills With Water Then Stops

I will try and help with this problem about Beko WM62125W Washing Machine,

Hi, sorry to hear about the issue with your Beko WM62125W. If the washing machine starts to fill, it usually means the door lock is working and the machine has entered the programme. But you mentioned it stops. You didn't specify when it stops during filling.

If it stops immediately after 5-10 seconds, there might be an electrical problem. However, if it fills a reasonable amount of water before stopping, there could be two possible issues. Either the heating system is faulty, causing an error that stops the programme, or there might be a fault with the motor. These issues typically arise midway through filling.

I've included an exploded diagram of your machine with all available parts. Use the reference number from the pictures to identify the correct part for your machine. There's also a wiring diagram to help you understand the wiring circuitry on this Beko washing machine.

Additionally, I've included the workshop manual. From page 40 onwards, it shows diagnostic features and what to test. There are also a couple of videos that demonstrate how to test water valves and inspect the motor's carbon brushes.

Take your time going through the PDFs as they explain everything needed for testing the machine. If any error codes appear, the manual will explain what to test for each error. It might also help to put the machine into diagnostic mode to find the problem.

I hope this helps you.

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko WM62125W Washing Machine Spare Parts