Beko DPU8360W Tumble Dryer Pump Not Always Working

I will try and help with this problem about Beko DPU8360W Tumble Dryer,

Hi Tim, sorry for the late reply. I was off work for a few days. I'm sorry to hear about your tumble dryer issue. If the pump works for 30 seconds and then stops, it might still be fine. The problem could be a blockage preventing water transfer. Try testing it in place with water in the chamber to see if it pumps water to the top of the machine. If it doesn't, there might be a blockage in the pipe or pump head.

I've got the full workshop manual for your machine, which explains everything. There's also a wiring diagram and exploded views of the machine. At the bottom of the page, there's a list of parts with genuine part numbers that are clickable links.

On page 6 of the workshop manual, you'll find pump specifications: 220 to 240 volts at 50 Hertz, 3,000 rpm, and winding resistance around 956. Your reading seems close to this. Further in the manual, you'll learn how the pump is activated and how often. Some systems use a float switch, while others are controlled by a circuit board.

I hope all this information helps you. There's also a test sequence and diagnostics mode for these tumble dryers in another PDF. Additionally, there's an exploded page on troubleshooting the pump for your Beko DPU 8360W model, which should help you diagnose the problem.

I've added related videos about this machine and there are more on the YouTube channel.

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko DPU8360W Tumble Dryer Spares