Beko DCU6130W Condenser Tumble Dryer Won't Turn On
I have a Beko DCU6130W Condenser Tumble Dryer and had replaced the buttons on the control panel of my tumble drier and re assembled. The unit then wouldn’t turn on. The socket is good and the 13amp fuse in the plug is good. No lights come on when connected to the mains. I have replaced the on/off button but still no change. What could I test next? Any help is appreciated Thanks Will
Tools Required
Hi Will,
Thanks for sending the information regarding your Beko DCU6130W Condenser Tumble Dryer.
I've attached wiring diagrams to help you troubleshoot. If there are no lights on the front of the machine, the circuit board may be faulty, or the machine may not be switching on properly.
Here's what to check:
- Verify that power is reaching the circuit board first
- Follow the two wires from the electronic filter at the back of the machine to the display
- Check that the button assembly is lined up correctly
Please use the wiring diagram to inspect all connections carefully. If you find any loose or damaged wires, reconnect them securely and test the machine again.
Contact me if you need any further help or if the issue persists after checking these points.
All the best,
Paul
Service Documents
Parts for This Model
Showing compatible parts for model Dcu6130w