Aeg Lavatherm T65170av Tumble Dryer Drum Spins, No Heat, Heater And Thermostats Ok, Cannot Locate Any Others
Hiya, I have an AEG Tumble dryer that is not heating up, when turned on it goes for about 2 minutes then clicks off. No heat coming from heater, drum spins around fine - PNC 91609525906 Lavatherm 65170AV SN:74409680, located the heater and the 2 thermostats at the back of the machine checked for continuity - all OK. Cannot find another thermostat anywhere, checked sides and back and drum inside. Is there another one anywhere???Located the ntc thermistor, haven't got a little connector to try and test it properly, I can probably make one tomorrow if you think this is the culprit BUT if the 2 thermostats (AND there is not another one fitted) and the heater are all OK is it likely to be anything else or shall I just order one.
I will try and help with this problem
If you have checked the heater and the two thermostats then I suggest you may look at the control board that is usually a problem with the relay this is quite a common fault I have included the video below to help you in replacing this i don't think you will have a problem with the NTC sensor but I have put all resistance values in ohms below for you to test.
I have included a lot videos in the links below on these tumble dryers to assist you in repairing you’re tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Parts for This Model
Showing compatible parts for model LAVATHERM